90% maximum/15% minimum (halftones exceeding 90% may appear as solid and under 15% may not print)
All files will be converted to CMYK on output. Convert all RGB colors to CMYK before submitting artwork. If utilizing a spot (PMS) color, please be aware that these will be converted to CMYK on output. We will utilize the spot (PMS) color as a reference when printing your job.
Please be aware that due to the limitations of the inkjet printing process some colors may not be able to be matched.
If using a Flood File (a solid color background), please do not knock out the center hole of the disc. We can adjust this dimension at printing to achieve the best possible print quality.
A 1/8" (3.175mm) bleed can be used on both the inner & outer diameter. This is not required, but can be helpful during setup.
Please keep text at least 2mm away from both the inner and outer diameter.
All Mac files must have fonts converted to paths/outlines before submitting.
For PC files, include the fonts used in the file when submitting or convert to paths/outlines before submission.
Preferred file types for art submission are Adobe®, Illustrator, pdf or eps.
Providing a pdf file for reference is recommended
Please place all templates and guidelines on a separate art layer. If providing a flat file, please remove all templates, knockouts, etc. before submitting art files.